How should the magnetic polishing machine deal with the oxide layer of metal products? Usually there are several methods.
1.Choose manual sandpaper polishing. But this also has a big disadvantage. If only one or two products need to be polished, you can still choose manual work. If the number is large, the manual speed cannot meet the needs.
2.Soak in medicine. The chemical reaction produced under the immersion of medicine can indeed achieve the effect of removing the oxide layer, but the disadvantage is that it is difficult to make the brightness. Generally, the medicine will return to its original dark color after soaking. Relatively suitable for products with low surface requirements
3.Electrolytic polishing. Electrolytic polishing can also remove the oxidation on the metal surface. The disadvantage is that the cost of making small pieces is relatively high. The power consumption is relatively large. Relatively suitable for large products
4.Magnetic polishing machine. The magnetic polishing machine can brighten the surface of the product while removing the oxide layer. One person can control multiple devices, and there is no technical requirement for the operator. At the same time, the magnetic polishing machine can not only remove the surface oxide layer, but also remove burrs, clean, and surface treatment in one step. Therefore, the magnetic polishing machine is also called a magnetic Valmieragrinding machine, a magnetic Valmieracleaning machine, and a magnetic Valmieradeburring machine. The disadvantage is that it is not suitable for large products. The cost is a bit high relative to large products. Metal products with magnetism.
The magnetic polishing machine can not only magnetically grind the oxide layer of die-cast aluminum, but also the oxide layer of copper parts, the oxide layer of stainless steel and other metal surfaces. The above is the introduction of the magnetic polishing machine, I hope it can help you.
